6 Tips to Save energy at home

0

1. Replace bulbs for LED lighting
Even if the bulb or halogen bulb is still working properly, it is smart to replace it. The purchase price of an LED lamp is higher, but still it pays for itself easily. An LED bulb is 85% more economical than an incandescent bulb and 75% more economical than a halogen bulb. On top of that, an LED lamp lasts much longer, up to 9x longer than an incandescent lamp. This way you don’t have to buy a new lamp all the time and you save both your wallet and the environment. There are LED lamps available in all shapes, sizes and shades, so there is always one that suits you. When you leave the room, turn off the light.

2. Reducing standby power
5.1% of our electricity usage is standby power. You can save money on your electricity bill by reducing the amount of standby power. You can reduce your electricity bill by taking the plug out of the outlet when you are not using it. If you don’t want to unplug it from the wall socket every time, turn off the main power.

Let’s turn off the main power if you don’t want to bother to unplug it from the outlet every time. Just by doing this, you can reduce standby power by 19%. Moreover, if you use a power-saving tap, and turn off the power-saving tap when you do not use home appliances. You can get the same effect as unplugging from the outlet.Also,with products like easy power plan we can look to generate free electricity.

However, as for the TV and air conditioning, unless you will not be used for a long period of time, unplug from the outlet. It is best to refrain from using them. Air conditioners can damage the air conditioner itself if you use it right after it is plugged in, and TVs should not be used for electronic Uses more electricity as it downloads larger data such as program listings

3. Isolate
When your house is no longer draughty, you can still lose heat in the winter when it is not properly insulated. Examples of insulation are roof insulation, cavity wall insulation and floor insulation. A subsidy has been made available for these forms of insulation. Another way of insulating is HR++ double glazing, which keeps heat inside and cold outside. Do you know how much you save per insulation measure?

4. Install a programmable thermostat
With a smart thermostat you can save energy. You can program in advance when the heating goes on and off again. So you can never forget to turn off your heating. A smart thermostat also makes it possible to provide insight into the consumption and you can control your heating remotely. You can also consider turning the heating a degree cooler and putting on a sweater, which also saves energy.

5. Heat pump
A heat pump is a sustainable alternative to a gas boiler, for heating your home. A heat pump does not run on gas but on electricity and makes clever use of the heat already present in a source. This heat is used as energy to generate even more heat. That’s smart, because it saves electricity! There are different types of sources that can be used: outside air, water source or geothermal heat. More information about water pumps can be found here:

6.Use less water
When you use less water, you reduce your water bill. When you use less hot water, you also reduce your energy bill (gas, or electricity in the case of a heat pump). So your savings are double. You can save hot water by using an energy-efficient shower head, but also by taking shorter or less frequent showers. You can also save energy by lowering the temperature.